3. If the paper is difficult to remove, you need to relieve some of the pressure in the Fusing Assembly. Open the printer�s rear access door. While holding the green paper release lever up, pull the paper out.
Figure 4-6
Releasing Paper from the Fusing Assembly
4. Replace the paper cassette and the toner cartridge, then close the top and rear doors. The printer should return to the Ready state. If it does not, try one of the following remedies: . Ensure the rear access door is fully closed and latched. . Check to see if there is more jammed paper in the printer (see the next page). . Open and close the printer�s top door or press the front panel button briefly.
